FERTAN® rust converter / rust converter
High-tech rust converter in the standard bottle - fits all commercially available underbody protection and cavity guns
1000 ml sufficient for approx. 12 - 15 m² (using a brush)
In the printing process, sufficient for cavity treatment of small cavities such as A-pillars, hoods, etc.
Sustainably atomizes and removes rust
Removes rust without sandblasting
Harmless to plastic, rubber, chrome and paint.
A product that has been tried and tested for more than two decades to remove rust and corrosion
Can be used successfully on lightly rusted, strong rust and also on bare metal - the protective effect is basically achieved
Built on a water basis for environmental reasons. The surface to be treated must therefore be free of dirt, oil, grease and silicone, i.e. metallically clean, but not rust-free
A second treatment may only be necessary in the case of extremely thick layers of rust, over 5 mm.
Use only at temperatures above 5 ° C and leave on for approx. 24 - 48 hours
Always clean the surface with water before the final treatment
Can even be used on damp surfaces and is free from harmful substances
Container type: bottle
Contents: 1 liter